faq

your questions,
answered

Everything you need to know about trussing, rigging, ground support, and working with Therio — answered clearly, so you can focus on the build.

products & trussing

Why use a specialised truss for LED screens?

The simple answer is that a specialised truss offers safer, faster, and more precise installations.

Safer: The Therio Innovation LED tile truss is designed specifically for LED screen loads. The central rail can support loads of 7800lbs which correspond to those of the largest LED video walls. Additionally, our unique Patent Pending LED tile header bar hangers are rated for wind loads (see data sheet for specific ratings). This truss is fully engineered for LED wall screens and does not use any loose bits of pipes and clamps that are not rated for this application.

Faster: You can pre-rig the header bars and the first row of the LED in the shop – where you’re not under pressure and can be more accurate - for a faster load in. Eliminates all issues by building the first row on site (the first row always takes the longest and has the most issues). The Therio LED wall truss is also compatible with all other industry standard lighting truss – no special adaptors required.

Using a few simple adaptors, our LED tile truss can be configured into a curved video wall. The rotatable forks (no tools required) permit the truss to be used in curved configurations.

Precise: Because you can pre-rig the LED screen in your shop, you can ensure that the top row is perfectly level. This reduces and eliminates tile gaps during installation due to rigid hang points (no span sets). The Therio Innovation LED tile truss eliminate the use of span sets. Use any shackle/eyebolt header bar in your inventory since the hangers can be positioned anywhere along the truss.

Does Therio have a pre-rigged lighting truss?

Therio’s1424 pre-rig lighting truss (TIPR-1424-F.2_188) is ideal for hanging lighting fixtures in pre-production and for faster load-in and load-out. It comes with Pre-rig truss with steel spigots with rounded ends (compatible with other major manufactures). Upon request, the truss can come with rotatable forks (no tools required) permit the truss to be used in curved configurations by using simple accessories.

It comes in standard lengths of 10', 8', 5', 4'. Custom lengths available upon request. Each length of truss is supplied with4 x stress proof 3/4'' steel pins + R-Clips. The truss is manufactured by certified welders and is compliant with ESTA ANSI E1.2 – 2012. Trusses are hung from the top chord only. The Therio pre-rig lighting truss is compatible with all other industry standard pre-rig lighting truss.

What materials are your trusses made from?

Therio trusses are manufactured primarily in 6061-T6 aluminum alloy, the industry standard for its combination of high strength-to-weight ratio, corrosion resistance, and ease of transport. For structural or custom industrial applications, we also fabricate in steel (welded to CWB Division 1 standards). All materials and weld procedures are certified and traceable.

How do I know which truss size is right for my project?

The right truss size depends on span length, total hanging load, and span-to-deflection requirements. As a general rule: 12" (300mm) box truss covers most small-to-medium touring and event builds; 20.5" (520mm) handles longer spans and heavier loads; larger profiles are used for permanent or industrial structures. Our engineering team can review your load calculations and rigging plot to recommend the correct profile. Contact us and we'll help you spec it properly.

Are your products compatible with other brands of truss?

Therio truss is manufactured to standard industry connection profiles (spigot and fork/pin systems), so many of our products are dimensionally compatible with common industry profiles. However, we strongly advise against mixing truss brands in a single structural system without engineering review : connection tolerances, wall thicknesses, and rated capacities vary between manufacturers. When in doubt, contact us before mixing systems on a load-bearing build.

Load Capacity & Safety

How much weight can a truss system hold?

Rated load capacity depends on the truss profile, span length, number of support points, and load distribution. A typical 10-metre span of 290mm box truss with two end supports might carry 400–800 kg UDL (uniformly distributed load), but this number changes significantly with point loads, shorter or longer spans, or additional intermediate supports. Always refer to the manufacturer's load charts for your specific configuration and never exceed the rated safe working load. Contact us for load tables or to have our engineering team review your specific setup.

What safety factor is applied to your rated load capacities?

Industry standard for entertainment rigging structures is a minimum safety factor of 5:1 (also written as WLL = breaking load ÷ 5). This means if a component is rated for 500 kg working load, it has been tested to failure at or above 2,500 kg. Therio products are designed and tested to meet or exceed these requirements, and load ratings are documented and available on request for each product in our catalog.

What certifications do your products carry?

Our manufacturing facility is CWB Division 1 certified (Canadian Welding Bureau) for aluminum and steel welding, and our processes comply with CSA W47.1 and W47.2 national standards. Applicable products carry ESTA/ANSI E1.2 compliance for entertainment trussing. Engineering drawings are available stamped by a licensed structural engineer upon request, which is required for many venue and permit applications.

How often should truss be inspected?

Truss should be visually inspected before every use for cracks, bends, damaged welds, deformed connections, and missing or damaged pins, bolts, and safety clips. A more thorough periodic inspection including measurement of chord deformation and connection wear should be performed by a qualified technician at regular intervals based on usage intensity. Any truss that has been shock-loaded (sudden drop or arrest of load) should be taken out of service and inspected before reuse, regardless of visual appearance.

Ground Support & Rigging

When do I need a ground support system instead of ceiling rigging?

Ground support is needed whenever ceiling rigging points are unavailable or insufficient. For example in outdoor venues, tented events, warehouses, or arenas where the overhead structure cannot support the required loads. Ground support systems are freestanding towers and horizontal truss spans that create their own overhead structure from the floor up. They require their own engineering considerations including base plate sizing, ballasting, wind loading, and floor load distribution.

What is a safe working load (SWL) and how is it determined?

Safe Working Load (SWL) (also called Working Load Limit (WLL)) is the maximum load a component or system is rated to carry in normal use, after applying the required safety factor. It is determined through a combination of material testing, engineering analysis, and reference to applicable standards (ANSI, CSA, etc.). SWL is always configuration-specific: the same truss section may have a different SWL at 6 metres versus 12 metres, or with two versus four support points. Always consult the product's load chart for your exact configuration.

Do I need a structural engineer for my rigging project?

For permanent installations, large temporary structures, any structure over people, and most permit applications, a stamped engineering drawing from a licensed structural engineer is required and is simply best practice regardless of legal requirement. Many venues also mandate engineering documentation before allowing any overhead rigging. Therio can provide stamped engineering drawings for our systems. For touring or temporary setups, at minimum a qualified rigger should review the load calculations and rigging plot before installation begins.

Orders & Lead Times

What is your typical lead time for standard products?

Lead times vary based on product type and current production volume. Standard catalog products are typically available within 2–6 weeks. Custom or engineered assemblies require additional time for design review, material procurement, and fabrication, generally 6–14 weeks depending on complexity. We recommend contacting us early in your project timeline. Rush production may be possible depending on capacity. Reach out and we'll tell you what's achievable.

Can you manufacture custom truss or structural assemblies?

Yes! Custom fabrication is a core part of what we do. From non-standard lengths and profiles to fully engineered one-of-a-kind structural assemblies, our Saint-Hubert facility is equipped to handle complex custom projects. We work from client-supplied drawings or can develop designs in-house. All custom work is engineered, documented, and fabricated to the same certification standards as our catalog products.

Do you ship internationally?

Yes. Therio ships to clients in 25+ countries. We have experience coordinating freight for both standard and oversized structural shipments, and can advise on packaging and documentation requirements for customs clearance. Contact our team to discuss shipping options and lead times for your destination.

Can I get CAD files or technical drawings for your products?

Yes. CAD files and technical data sheets are available for most products in our catalog. You can request them directly through our website or by contacting our team. For custom or engineering-sensitive projects, NDA agreements may be required prior to releasing detailed fabrication drawings.

Get in touch

Have a project in mind?

Tell us what you need to build. Our team will get back to you within one business day.